← Product page · DE · FR · NL · DA · ES · IT · PL · SV · NB · PT · CS · TR
Article code P016
Overboots and overshoes
ESD overboots with conductive ribbon, non-sterile
Overboots with conductive ribbon and high-grip elastomer sole for ESD areas in the cleanroom. The conductive ribbon runs 100 cm inside the boot and is sewn 30 cm under the sole; the latex-free elastomer sole is designed for a coefficient of friction of at least 0.5.
Technical details
| Article code | P016 |
|---|---|
| Delivery condition | non-sterile |
| Material | 60 g/m² fabric, latex-free; high-tack elastomer sole; conductive ribbon |
| Dimensions | Conductive ribbon 100 cm exposed, 30 cm under the sole; shaft height set with the approved reference sample |
| Sizes | One size |
| Pack size | 10 pairs per double bag; 8 outer bags per carton = 80 pairs; carton 43 × 28 × 31 cm |
| Target environment | Cleanrooms from ISO Class 5 and ESD protected areas |
| Supply | on request after release of the series, quote with price and pack size |
Features
- Conductive ribbon with skin contact
- High-grip, latex-free elastomer sole
- 60 g/m² low-shedding fabric
- Non-sterile, for ESD-protected cleanroom areas
Target specification (design targets)
Target values for series production. They describe what we design material, construction and testing for and are not a commitment for the delivered article. Lot test reports will be supplied with the series.
| Basis weight | 60 g/m², tolerance ±2 g/m² |
|---|---|
| Hydrostatic head | minimum 100 mm H₂O |
| Particle shedding (Helmke drum) | Category I to IEST-RP-CC003 |
| Surface resistivity | typically 10⁷ to 10¹⁰ Ω |
| Ribbon resistance | 10⁵ to 10⁶ Ω |
| Sole slip resistance (ASTM D1894) | Coefficient of friction minimum 0.5 |
| Tear strength | minimum 1.6 kg |
| Shelf life | 5 years from manufacture |
| Storage | Dry and cool below 40 °C, away from direct sunlight |
Standards framework
- IEST-RP-CC003 (particle shedding)
- ASTM D1894 (slip resistance)
- IEC 61340-5-1 (operator's ESD control programme)
Notes on use
Overboots are put on seated in the airlock, first the foot across the bench, then the ties around the leg. The conductive ribbon must touch the skin, otherwise it does not conduct. Dispose of after use; single-use product.